How to apply a concrete cement floor on existing tiles?

The advantages of cemented cement on the tiles

The application of cemented cement on existing tiles has many advantages that justify its growing success in renovation projects.

First of all, the cemetery offers a uniform surface, in the face of classic tiles with the articulations often difficult to clean. By covering the tiles directly, it allows you to hide these unpleasant lines by creating a modern and refined appearance. As such, it is very popular in the minimalist or design interiors.

His low thickness, between 2 and 4 mm, constitutes another resource. Unlike other solutions that involve the removal of the existing coating or the positioning of a new ground that significantly modifies the total height, the cerato concrete retains the levels of the floor. This avoids having to adjust the doors or other structural elements.

In addition, the cerato concrete stands out for its almost infinite customization. Available in a wide range of colors and finishes – mat, satin or shiny – adapts to all internal styles, from the most rustic to the most contemporary. With Biolooking products, you can create unique and thinly naked shades that give your spaces an authenticity.

Finally, choosing an ecological cemetery, like the one we offer, means opt for a material respectful of your health and planet. Without volatile organic compounds (COV) and using natural pigments, our waxed concrete offer a lasting and healthy alternative for your renovation.

The preparation steps for a perfect result

A successful application of cemented concrete begins with careful preparation. It is a crucial step that guarantees sustainability and aesthetics of the final result.

1. Cleaning and inspection of the tiles

First of all, make sure the tiles are in good condition. The tiles must be stable and solidly attached to the ground. Any failure, like a tile that moves or sounds empty, must be correct. Do not hesitate to remove and replace defective tiles or to inject a restorative glue if necessary.

In determining cleaning is therefore essential. Use a natural degreaser to eliminate any trace of fats, dust or cleaning products that could damage the adhesion of the concrete concrete. For unborn tasks, light sanding may be necessary. Make sure the surface is perfectly clean and dry before taking the next step.

2. Application of the attachment primary

The attachment primary is essential to ensure the adhesion of the concrete cerated with tiled support. At the biologenment, we offer primary primaries formulated for optimal compatibility with our natural products.

This undercoat generally applies using a roller or brush in thin and uniform layers. It must be well distributed to avoid irregularities. The drying time varies according to the products, but it is essential to respect it before continuing the work.

The application of the concrete concored: a delicate step

The process of application of the concrete concrete is a true artisan technique that requires patience and precision.

1. Installation of a layer of preparation mortar

Before applying the concrete concrete itself, a specific layer of mortar is spread to fill the joints of the tiles. This step allows you to create a perfectly uniform base and prevent the joints lines from appearing in relief under the cemetery.

Use a plate to apply the mortar in the same way. After the beginning of the drying, wet the mortar and rubbed with the taloche of foam to eliminate the thicknesses and then obtain a rough but flat and homogeneous surface.

2

Cerato concrete applies in two thin layers, using a plate. The second layer should be applied preferably while the first layer is not completely dry. To ensure a perfect grip and a homogeneous finish. This method allows you to create thin visual effects and to play with shades for a unique rendering.

The Finishes: the final step for impeccable rendering

The finish is essential to preserve the appearance of the concrete concrete, strengthening its resistance.

1. Sanding and protection

Once the last layer of cemented cement is dry, perform a light sanding with very fine abrasive paper to remove microimperfections. This passage perfects the plot and prepares the soil to receive protective products.

The application of a water repellent is essential to protect the ground from spots and infiltrations. To biologment, our natural solutions offer an effective barrier without compromising the ecological aspect of the coating.

2. Application of wax or paint

To finalize the project, apply a special wax or a waxed concrete paint. This treatment offers a satin or mat finish according to your preferences, while facilitating daily maintenance. By opting for natural finishes, you contribute to a healthy interior and with a low environmental impact.

Choose the Bioloor for an eco -sensitive renewal

Renewing the tiled soil with cemetery is a great way to modernize your interiors in compliance with the environment. With Biolooking products, benefited from sustainable, ecological and aesthetic solutions to improve your spaces. Pay particular attention to the phases and preparatory finishes to ensure a result that meets your expectations.